ProductsCurrent location :Home > Products > Rigid-flexible pcb
Rigid-Flexible PCB (HIGH TG six-layer blind hole plate)
【Brief】:

1, industrial use: including industrial, military and medical fields. These areas of product requirements for hard and soft board:

 high reliability, high precision, low impedance loss, complete signal transmission quality, durability, etc. 

Because the process is complex and the output is small, the production cost is high.

2, mobile phone: The application of soft and hard board in the mobile phone, common are folding mobile phone round point, image module, button and RF module.

3, consumer electronics: the soft and hard boards used by DSC and DV are the most representative. 

In terms of performance, the soft and hard boards can be connected to different PCB hard boards and components in three dimensions, 

which can increase the total use area of the PCB under the same line density, improve the circuit load capacity, 

and reduce the signal transmission limit and assembly error rate of the contact. In terms of structure, 

the soft and hard board is light and thin, and it can flex the wiring, which is of substantial help to reduce the volume and reduce the weight.

【Series】:Rigid-flexible pcb

Rigid-flex Mainboard PCB Board

1.Introduction of OEM Professional High Rigid-Flex PCB

Landes Circuits is capable of providing full turnkey and partial turnkey printed circuit board assembly services. 

For full turnkey, we take care of the entire process, including preparation of Printed circuit boards, procurement of components, 

online order tracking, continuous monitoring of quality and final assembly. Whereas for partial turnkey, the customer can provide the PCBs and certain components, 

and the remaining parts will be handled by us.

2.Features-Our Products Advantage

1. Over 10 years experience manufacturer in PCB Assemble and PCB field.
2. Big scale of producing makes sure that your purchase cost is lower.
3. Advanced production line guarantees stable quality and long life span.
4. Produce almost any PCB as your requirement.
5. 100% test for all customized PCB products.
6. One-stop Service ,we can help to purchase the components









3.Rigid-Flexible manufacture capability


Landes Circuits Co., Limited
FPC Technology and Capabilities
Material FR4, Polyimide / Polyester
Counts Flex: 1~8L; Rigid-Flex: 2~8L
Board Thickness Min.0.05mm;  Max. 0.3mm
Copper Thickness 1/3 oz — 2 oz
CNC Drill Size (Max) 6.5mm
CNC Drill Size (Min) Flex: 0.15mm
Holes Location Tolerance ±0.05mm
Coverlay Drill Size (Min) 0.6mm
Hole to Coverlay Opening Windows (Min) 0.15mm
Min Line Width / Spacing 0.1/0.1mm
Copper Thickness on Hole Wall Flex:12-22μm
Min Pad Size φ0.2mm
Etch Tolerance Finished line width tolerance ±20%
Pattern Registration Tolerance ±0.1mm (Working Panel Size: 250*300mm)
Coverlay Registration Tolerance ±0.15mm
Solder Mask Registration Tolerance ±0.2mm
Solder Mask to PAD Non photosensitive: 0.2mm
  Photosensitive: 0.1mm
Min. Solder Mask Dam 0.1mm
Misregistration Tolerance ±0.30mm
 for Stiffener, Adhesive, Glue paper  
Surface Finish Plating Ni / Au ; Chemical Ni / Au ; OSP

4. Related Rigid-Flexible board


5.Application



6.Workshop



7.Certificates

We have set a separated department where exclusive production planner will follow your order production after your payment, to meet your pcb production and assembly requirement.
We have below qualification to prove our pcba.


Related Products
Pre:Polyimide FPC cable Yellow flexible pcb
Next:4-layer impedance + half-hole plate(Rigid-Flexible PCB)

Home    About Us    Capability    Products    News    Contact Us

  • Landes Electronics Co.,Limited
  • Tel: +86-134-8078-2593 /+86 183 7647 7219
  • +86 134 8078 2593
  • E-mail:sales@landespcb.com
  • 4/F A Building ,Haoye Park,Xixiang,Fuyong town,Baoan District Shenzhen ,China
Follow Us
Online Service
QR Code